Page 1 of 1
Posted: Tue Sep 25, 2001 1:01 am
by Nick
Hi can someone help with the breakdown on the power supply on a SRIB?? Amp's, Polarity etc..
Thanks,
Nick
Posted: Tue Sep 25, 2001 5:53 am
by Monty
Hi:
I would recommend the Factory Power Supply.
The Power Supply in question is
a 0180302E27
Stancor STA-4112B
Center Pin ( minus ) Outer shell Positive
Rated 12VDC @ 300ma
Posted: Wed Sep 26, 2001 4:52 pm
by Nick
Thanks Monty,
Also, as mentioned in BatLabs cable info I tried a standard serial cable (PC - SRIB) on my laptop but it wont read?? The M cable works fine??
Nick
Posted: Wed Sep 26, 2001 9:32 pm
by Twisted_Pear
I use a standard serial cable and it works fine.
Posted: Thu Sep 27, 2001 5:47 am
by Monty
Hi:
Glad the information was helpful.
Also, with SRIB's, you should have a Well
Made cable, Shielded, and less than 6' in lenght. Any longer than that, you may enconter a timming problem between the Computer and SRIB
Most Shielded Cables with larger wire less than 6 feet should work A_OK
MS
Posted: Thu Sep 27, 2001 6:08 am
by Nick
Thanks MS & T_P,
After I posted my last message I thought I would try a shorter cable (6inches shorter) and it worked with no problem! It's funny how you over look those small things.
Nick