Page 1 of 1
Posted: Wed Sep 26, 2001 2:14 pm
by FatBoy
We recently had a trade in at our shop we took ina MCR-100 and sold them a RKR-1225. I was wondering how to program this thing. I see 2 plugs for programming, but have been unsuccessful in finding the cable or RSS part number. Thanks, FatBoy.
Posted: Wed Sep 26, 2001 2:34 pm
by JoeO
Believe I have used the R100 cable to program the MCR-100. The motorola pn is 01-80358A52, but you can build one from the instructions right here on batlabs. Just check under the model specific, R100, there should be a highlighted word contained in the sentence that says "Look at programing cable here" or something to that effect.
Yes there are two plugs, one for the receive and one for the transmit. The radio came in both a PL version and DPL version.
<font size=-1>[ This Message was edited by: JoeO on 2001-09-26 18:39 ]</font>