Page 1 of 1
Saber III in saber II houseing
Posted: Mon Mar 22, 2004 12:41 pm
by Motoman
I've got a Saber III however it's in a saber II housing. I openened it up and it even and the DTMF board installed on the front. So all it needs is a Saber III housing. But do i need to have the saber III housing to have it do 120 ch?
Saber 3
Posted: Mon Mar 22, 2004 1:54 pm
by Redtop47
No, You can still use the 120 channels with the saber 2 housing on the radio. I have the same one.
Saber 2 vs. Saber 3 housing...
Posted: Mon Mar 22, 2004 4:26 pm
by Tom in D.C.
The only thing you can NOT do with a 2 housing on a 3 radio is to directly access a zone; you have to "step" through the zones instead of punching in the zone number then the enter button.
Obviously also you can't dial DTMF tones but that's another matter.
Posted: Tue Mar 23, 2004 6:06 am
by NSPD
You can't do user-programmable scan with a Saber II case either.