CDM1550 Scan/Bank issue

cfdeng3 · Post by **cfdeng3** » Mon Mar 11, 2002 12:00 pm

I have an issue with my CDM radio. When I am in bank 2 and the radio is on scan if I go up or down with the channels it goes back to bank one. I have to take it out of scan to go through the channels in bank 2.

I have looked through the programming and have had no luck finding what is causing this.

CATAWBA911 · Post by **CATAWBA911** » Tue Mar 12, 2002 1:30 am

I HAVE THE SAME PROBLEM WITH MY CDM1550

ericsze · Post by **ericsze** » Fri Sep 06, 2002 7:20 pm

Make sure that all your channels are listed in the same scan bank. Check your channel personalities and make sure than under the scan tab that they all say SCAN-1, not "disabled"

See if that helps.