Batboard

Can a saber III scan on all freqs?

Thanks

Holy Vague.....

Original Saber?
Saber Si?
Astro Saber?

Define "All Freq"

tpg

Astro Saber
and lets say freq 136 to 174.

Thanks

It will scan whatever is in the list you create. You can only scan one list at a time. The list can contain any frequency in its operating range of 136-174.


mancow

To answer your question if it can do something like a ham vfo scan or all frequencies between 136-174... No.

The AS, like all /\/\'s, is not a ham radio therefore it doesn't do "VFO scan". It will only scan the user-created scan list(s) of actual channels.

1 Scan list = 16 channels

You can either have a "radio-wide" scan list by creating one scan list, and assigning that list to all zones...or you can have a "Zone-slaved" scan list for each radio by creating a separate scan list for each zone.

As mentioned before, only one 1 scan list can be scanned at one time. If you are using the AS in a busy area, use a zone-slaved scan setup. If you only need to scan a few channels spread out thru the radio, use a radio-wide scan list.

Thanks guys you just answered my question.

Rick