Page 1 of 1
Maxtrac Ignition power up
Posted: Thu Sep 23, 2004 11:50 am
by mikerabbit
Hello is there a 5 pin accessory harness to turn on a maxtrac with the ignition on phase?
If so what is the model # or does anybody have one for sale?
Mike
5-pin Maxtrac
Posted: Mon Sep 27, 2004 11:24 am
by Glen W Christen
Pin 5 is ignition control. You also have to cut/remove the little green fuse on the logic board. If you don't have a plug, the p/n is(used to be) 0980134M01. If you don't need any other accessories, just solder to the pin or if you have a pin of the right size, shove it on without the plug body.