Page 1 of 1

NE Meet --- DEC 4th -- Matamoras, PA

Posted: Tue Nov 16, 2004 11:41 am
by alex
Continued from:
http://batboard.batlabs.com/viewtopic.php?t=39528

We will be meeting here on Dec 4th.
Post here if you know for a fact you'll be attending.
OK, if anyone needs directions beyond these, please e-mail me.

From CT, or NY, I-84 to Pennsylvania. Once over the bridge (no toll) get off at the first exit (Matamoras) and make a right at the bottom of the ramp. Go approx. 1 mile and look for the Polar Bear ice cream building on the right (just after the Apple Grill resturaunt). We are in the same building as the Polar Bear.

From NJ, depending on where you are coming from. If down Rt. 80, get off exit 34B into Jefferson (Rt. 15) and follow 15 all the way down to Montague NJ (NOTE: Rt 15 will turn into Rt. 206 about half way there) Continue down Rt. 206 to the Milford Bridge ($0.75 toll) and bear right once past the toll. Make a right at the traffic light (Only one you'll come to) and go about 6 miles untill you come to the Polar Bear ice cream building on the right (just after the Apple Grill resturaunt). We are in the same building as the Polar Bear.

If coming down I-80 to the Delaware Water Gap, take I-80 into PA and get off at US Rt. 209 (heading towards Milford) Take Rt-209 into Milford and make a right at the traffic light (Only one you'll come to) and go about 6 miles untill you come to the Polar Bear ice cream building on the right (just after the Apple Grill resturaunt). We are in the same building as the Polar Bear.

If coming from NYC or Westchester area, take Rt.17 to I-84 and head towards Pennsylvania. Once over the bridge (no toll) get off at the first exit (Matamoras) and make a right at the bottom of the ramp. Go approx. 1 mile and look for the Polar Bear ice cream building on the right (just after the Apple Grill resturaunt). We are in the same building as the Polar Bear.

If anybody needs anything more, drop me a PM or an e-mail and I'll get you directions.
_________________
Chuck Pranski

Posted: Tue Nov 16, 2004 3:17 pm
by Station House Products
OK Gang,

If anyone needs directions, PM me and I'll get them out to you along with a list of hotels. I'm not 100% certain, but the ball and chain may let me open the house up to a few people if they need bunking accomodations. :o I will update on this further as more infor becomes available.

Posted: Mon Nov 22, 2004 5:07 am
by Station House Products
Pj wrote:Do we have a meet time frame?
You guys decide. I am there anytime after 10:00 in the morning, so.... Just let me know.

Posted: Mon Nov 22, 2004 6:01 pm
by motor59
Well, I know it doesn't matter a hill of beans to anyone else, but...
I'm at the academy until 1615 (barring an early class completion).
Mapquest says 1.5 hrs. Since I tend to exceed the marked limit a wee bit :wink: ,
I'll probably shave a little off that, so figure me to arrive in the 1730-1745 timeframe.

Posted: Sat Nov 27, 2004 6:41 am
by Pj
The guest list so far:

Chuck
Jaymz
Alex
Pj
Motor59
Humhead +1
KitN1MCC

Post a message here if your going...I'll add you to the list and delete the post..

Posted: Sat Nov 27, 2004 11:34 pm
by nmfire10
It is looking good for me. It's only a 2 hour drive for me so I doubt I will need overnight accomdations. I might need to effect revenge on YOUR office this time Chuck!

Posted: Sun Nov 28, 2004 11:04 am
by Station House Products
Sorry to disappoint you Matt, but I don't have any ID badges laying around. :P

Posted: Sun Nov 28, 2004 1:50 pm
by nmfire10
Station House Products wrote:Sorry to disappoint you Matt, but I don't have any ID badges laying around. :P
I'll find something else. How about cash from the register??

Posted: Sun Nov 28, 2004 5:18 pm
by Station House Products
Sorry again Matt. I'm so poor, I can't pay attention!

I'm so broke, crazy glue can't put me back together!

Thank you, thank you. I'll be here all week!

Posted: Tue Nov 30, 2004 4:02 pm
by nmfire10
I will find something!

So are there any comms we should use for the drive and the approach? I want to get everything programmed in all the various radios well ahead of time.

Posted: Tue Nov 30, 2004 4:14 pm
by JAYMZ
MAtt, if you use the Dayton channels you should be good to go.

151.880 DPL 143 I'm sure will be the primary...

Posted: Tue Nov 30, 2004 4:34 pm
by KitN1MCC
what time is every one gonan be there and stuff

and mat u want ot ride down in the Furture neck truck

Posted: Tue Nov 30, 2004 4:35 pm
by Station House Products
I'll be sure to have a radio set up on that freq. for the "talk in".

Posted: Wed Dec 01, 2004 3:12 pm
by KitN1MCC
can we have an exact address for a map quest search

Posted: Wed Dec 01, 2004 6:29 pm
by Station House Products
KitN1MCC wrote:can we have an exact address for a map quest search
1004 Pennsylvania Avenue
Matamoras, PA 18336

Posted: Thu Dec 02, 2004 7:56 pm
by KitN1MCC
i want to leave here about 3pm or so and head down

Posted: Fri Dec 03, 2004 1:23 pm
by nmfire10
I don't have DPL on the VHF mobile, only my portable. Is there a UHF Bat-Channel I can drop in the CDM??

Anyone have narrowed down times for this?

Posted: Fri Dec 03, 2004 1:51 pm
by JAYMZ
Matt I thought you had a VHF CDM?

Anyway... for times what is everyone thinking. I know PJ Alex and I are getting waffles tomorrow morning and we have a stop to make around lunchtime.. after that.. who knows what kind of trouble we'll be getting into.

Posted: Fri Dec 03, 2004 2:16 pm
by nmfire10
Nope. The only things I have that are VHF are the 2M side of my Icom mobile and a GP300. Everything else is UHF.

Posted: Fri Dec 03, 2004 4:29 pm
by Matt
As I told Matt earlier:

Bring bail money, because someones going to need it!

Have fun guys.

Posted: Sat Dec 04, 2004 1:38 pm
by KitN1MCC
i am gonn leave my house here at 5pm in ct if any one logs in here to check call my cell 860-836-6275 at 5:15 or later

Posted: Sat Dec 04, 2004 3:50 pm
by Station House Products
Hey Matt, WHERE THE FUNK ARE YOU?????

Posted: Sat Dec 04, 2004 4:49 pm
by sglass
if anyoen ends up drivign bacl through my neck of the wood, feel free to drop by. No reason fall asleep behind the wheel and wreck.

Seth

Posted: Mon Dec 06, 2004 7:23 am
by JAYMZ
A good time was had by all..