Page 1 of 1
RSS/CPS error MTX838
Posted: Tue Feb 08, 2005 1:43 pm
by mdt1277
Dose anyone know how to get around this RSS/CPS error MTX838
( No user function provided to convert block type to block ID for blovk with type 0 )?????? Please help!!!
When I use RSS/DOS v6.7 I get ( 12013 An unrecoverable error has occured. Processing can not continue. 0/57 ) ??????
Re: RSS/CPS error MTX838
Posted: Tue Feb 08, 2005 1:51 pm
by Josh
mdt1277 wrote:Dose anyone know how to get around this RSS/CPS error MTX838
( No user function provided to convert block type to block ID for blovk with type 0 )?????? Please help!!!
I'd say the first step is to quit using CPS....because the MTX838 is an RSS/DOS read and programmed radio!
-Josh
Posted: Tue Feb 08, 2005 5:08 pm
by Motoman
Depends, on the black label on the back of the radio does it say "MTX-2000 Handi-Talkie"? Or just MTX Handi-Talkie, if MTX-2000 it should be able to be programmed by CPS of not use RSS.
Posted: Wed Feb 09, 2005 5:56 am
by wavetar
Motoman wrote:Depends, on the black label on the back of the radio does it say "MTX-2000 Handi-Talkie"? Or just MTX Handi-Talkie, if MTX-2000 it should be able to be programmed by CPS of not use RSS.
Only the MTS2000 is CPS programmable...the MTX2000 can show up on MTX838 radio lables, it has nothing to do with whether it's an MTS2000 or not.
If you cannot read the radio with a
known good programming platform, in DOS RSS 6.07.00, then the chances are very high the radio's codeplug is corrupted.
What are you using to read the radio? Computer specs, RIB type, DOS version would all be helpful.
Todd