Batboard

hi,erery one I want to set a "SENT ID SIGNAL" function for my saber, which function i should select on the RSS's feature option?
MY saber H44san7139an
RSS R07.01.00

thanks

go into "Create/Modify/View Codeplug...then press F4 scroll down & highlite H958 (for MDC 600) or H959 (for MDC 1200) depending on which MDC you want? follow the prompts Before Call/After Call ect....
then go to F5 and put a "Y" on MDC on PTT on the channel you want..
if I left anything out, come back here.......jim
___________________________________________
hope you have someone at the other end to read-hear the MDC
if this is what you want?

thanks, got it