Page 1 of 1

Anyone decipher this portable mod number?

Posted: Tue Feb 15, 2005 10:40 pm
by Charlied
H43GCU7180AN


It looks like the last two in indicate freq band.

AN = low band
BN = VHF
CN = UHF


Am I correct?

Posted: Wed Feb 16, 2005 12:16 am
by MTS2000des
sounds like a VHF MT1000, high power, 8 channel. could be one of the following splits:

136-151
146-162
157-174
146-174

only way to tell is read it with RSS or open the radio and look at what is stamped on VCO module.

RADIO

Posted: Wed Feb 16, 2005 5:59 am
by 1 Adam 12
No the last do do not indicate band. The 3rd digit in this case H43... 3 is the band which is VHF, 4 would be UHF, etc, ect, . The second digit indicates power and the last two ie AN, BN are revision and version numbers

H43GCU7180AN

Posted: Wed Feb 16, 2005 8:35 am
by Dan562
H = Portable Products
4 = Power Level 5 Watts
3 = Frequency Band 150 - 174 MHz
G
C
U = Universal Connector on Top for Ext. Spkr / Mic, ETC.
7 = Software Programmable
1
8 = ??? Manual only indicates 0 as a 8 Channel Rotary
0
B = Revision to unit. Original "A", then B and finally C
N = Originally SOLD with Standard accessories

More information needed, order # 68-81067C40 from /\/\ AAD (NPD) MT1000 Handi-Talkie Portable Radios Instruction Manual (Service Shop Manual).

Dan

Posted: Wed Feb 16, 2005 9:43 am
by Charlied
Well that's finer than frog hair.

Couldn't we have that info on the site somewhere.

I know I'm a low life who hasn't contributed, but it just seems it could be.

Thank's