Page 1 of 1
Motorola Saber III Keypad
Posted: Sat Feb 19, 2005 10:13 pm
by Motoman
Is there a way to do channel input using the keypad or zone input? If so how do u activate the use of the keypad to do it? Thanks.
S3 keypad...
Posted: Sun Feb 20, 2005 6:47 am
by Tom in D.C.
You set either "channel only" or "zone and channel" operation in the RSS, then you use the keypad accordingly. If your keypad is not working on an otherwise properly working S3 then you have a problem.