Page 1 of 1
Maxtrac Fuse Question
Posted: Tue Feb 22, 2005 12:52 pm
by Two Tone
Ok, so i finaly bought my first mobile radio, (yay for me) so heres the thing. I have a Motorola Maxtrac, with a 25 watt transmitter. I have an inline fuse hooked up to it. What type of fuse should i use for this.
Posted: Tue Feb 22, 2005 2:47 pm
by kcbooboo
For the main power cable, a 15A automotive-style fuse will be fine.
If the unit also has a wire for ignition control (coming out of the accessory plug), a 4A fuse will be more than adequate.
Bob M.
Posted: Mon Mar 19, 2007 7:21 am
by Two Tone
Can someone help me on how to wire my maxtrac for ignition control? I have the 16 pin model.
Posted: Mon Mar 19, 2007 8:03 am
by Bruce1807
http://batboard.batlabs.com/viewtopic.p ... c+ignition
shows the ignition sense and how to enable and disable.
Look on the model specific stuff on the home page and there is a spreadsheet detailing the pinouts
Posted: Tue Mar 20, 2007 7:58 pm
by matt_tjaden
Should be pin 10