Batboard

Does anyone here on the board have the capabilities to program the prom for a purc 5000, 900mhz? please contact off the board for further discussion please. Thanks, Mike. [email protected]

I am going to be needing some programming in the not too distant future as well. If any of those that replied to the original post would care to, please let me know details (price, etc.) and whether you can supply the 2716's or whether I need to provide them.

Thanks,
Tom KB5DPE

The "analog" PURC 5000 uses a 2732 eprom to store the code plug information. E-mail me direct for more info.

73's

andy and burnie both do a great job with proms .. be worned that when you frist fire up your purc 5000 9oomhz that it will seem to be way off freak they must be given at least 45 mins to settle down i have many of these and parts too what i did was had them make up an image from a prom and burned my own if you are able to do this i might be able to send you an prom image
http://n8obu.com/
http://photos.n8obu.com/gallery/Repeater

Thanks for the comments. Will contact when I'm ready to program.

73 Tom KB5DPE