Batboard

I have an 8 channel Maxtrac/Radius with a 16 pin connector, model # D43LRA775CK. Would like to know if it can be converted to 32 channels with scan. Also looking for someone on the board that would be willing to do it if it is possible. Reply here or PM with cost and preferred payment method.
Thanks.

this should give you all the info you need.

http://www.batlabs.com/maxrad.html

Or here:

http://www.repeater-builder.com/maxtrac ... grade.html

PM or Email me if you have any questions.

If youd prefer it done by another individual due to not being so sure of your abilities = Read on.

Ill convert your posted mobile above to the full capabilities of a 32 ch mobile with scan / Two tone =encode and decode(QCII)

Will supply the HLN5569 eprom needed to allow the 32ch upgrade along with the tuning that so many as i hear do not do to make the radio work to its full potential.

The kicker is your radio must be functioning properly before i do the conversion= not into the fix before ect / not fair to me.

You pay shipping to me and back to you.

Ill do the conversion for 100.00 and id accept PayPal as long as its from a bank or a balance as im not setup for credit cards through PayPal or a Postal M/O .

Just so you know the HLN5569 chip is aprox 25.00 my cost through M so im doing the conversion for 75.00 profit and standing behind my work as to proper tuning and initiation ect.

Your radio will work properly when you get it back.

If interested Email me at. [email protected]

EKLB