whelen wiring help
Posted: Tue Dec 13, 2005 6:17 am
I have a used Whelen edge with 8 strobe heads, 4 halogens, alleys, and the pierce alert -to install on a new brush truck. It came off an old police car our city had.
Nobody took the time to mark anything when it was removed and I don't want to trash the power supplies.
I have been to Whelen''s web site and cannot find any wiring diagram that comes close to what I have.
This bar has 2 cables, one smaller than the other.
The small cable has red, black, blue, orange, green, white
The large cable has red, black, blue, orange, green, white, yellow, grey, brown, red/black, white/black, and a sheild containing white, black, and bare.
The model information is worn off however, I find that it was manufactured in 1998
I would appreciate any information on this bar
Thanks, Jeff
Nobody took the time to mark anything when it was removed and I don't want to trash the power supplies.
I have been to Whelen''s web site and cannot find any wiring diagram that comes close to what I have.
This bar has 2 cables, one smaller than the other.
The small cable has red, black, blue, orange, green, white
The large cable has red, black, blue, orange, green, white, yellow, grey, brown, red/black, white/black, and a sheild containing white, black, and bare.
The model information is worn off however, I find that it was manufactured in 1998
I would appreciate any information on this bar
Thanks, Jeff