I currently have a remote mount Spectra. Only problem is that its not the freq range that I need. I've found a dash mount thats the right range but for my install I need a remote mount. Is there a way I can use my remote head, cable and other remote parts and swap them with the dash mount unit ?
Thanks in advance,
Doug
Spectra Dash Mount to Remote Mount.
Moderator: Queue Moderator
Yes...all you need to do is remove front plastic containing the display, and all the push buttons. There are two screws on either side of the front plastic. Take those out and pull up on both sides of the platic front. You will then see the iterconnect board that connects the front of the radio to the radio itself, remove that.
Take you current control head and remove the front platic in the same way...so now you have a front plastic and a back housing from your control head.
Take the radio's front cover off in the same manor. Your will either have one or two DB25 pin sockets on the front were the control cable conects too. Remove that from your current radio. You then need to place that front platic piece onto the new radio that was once a dash mount. and then take the back housing from the control head and put it on the back of the new control head front platic...that is if they are diffrent. If your current radio is a A5 head and your new radio is the A5 head, all you need to do is swtich the front plastic on the radio.
Hope this helps. and makes since
Take you current control head and remove the front platic in the same way...so now you have a front plastic and a back housing from your control head.
Take the radio's front cover off in the same manor. Your will either have one or two DB25 pin sockets on the front were the control cable conects too. Remove that from your current radio. You then need to place that front platic piece onto the new radio that was once a dash mount. and then take the back housing from the control head and put it on the back of the new control head front platic...that is if they are diffrent. If your current radio is a A5 head and your new radio is the A5 head, all you need to do is swtich the front plastic on the radio.
Hope this helps. and makes since