Batboard

ive just receved about 4 smartnet controlers 2 i belive is (T-5292A) and the other 2 is (T-5076A) it also came with 20 quantars. what is involved in reprograming the controllers. or does motorola have to do this. i know there is the issue of licencing and such but that has been taken care of. im just curious as to what is involved

The information has to be burned into the PROMS on the CSC board(s). I know that Motorola UO software division can do it (@ about $800 per PROM) - but whether or not you can find someone privately to do it, I do not know.

You also must know all of the details of overall system features and how you want to have the system set up. Examples include what frequency order, which channel/channels are control channels, voice channels, securenet channels, telephone interconnect, call sign(s) and BSI channel(s) - if you are digital capable, which talk group and individual ID blocks are analog and digital, etc. Motorola has a sheet you can fill in with the information that they need.

Depending on the vintage Genesis can do some prom programming.
If your not changing system keys or frequencies just plug in a dumb terminal and away you go

none of the freqs or sys key will change the system was taken out of service from the local pd and was given to the school board. we are in the process of getting the licence transferd (900 mhz system) the pd has since gone to the countys 800 system for "interop" so we were given the radios and system to replace the out dated uhf stuff

all you need is hyperterminal then and the system manual

is the system manual is it specific to this paticular system we didnt recive one. where could i look to find one

Operation manual is 68-81066E60

Should be available on MOL
It includes the programming instructions

Bruce1807 wrote:Operation manual is 68-81066E60

Should be available on MOL
It includes the programming instructions

6881066E60

MAN INSTR TRUNKED RAD CCU
Unit of Measure: 1 EA

$50.00

Jeff