Page 1 of 1
ASTRO SABER PROGRAMMING CABLE
Posted: Sun Jun 23, 2002 8:00 pm
by medic40917
ANYBODY KNOW WHERE YOU CAN BUY A ASTRO SABER PROGRAMMING CABLE. THEY RETAIL FROM MOTOROLA FOR $300.00. THATS JUST TOO MUCH TO SPEND IT YOU KNOW WHAT I MEAN.
Posted: Mon Jun 24, 2002 12:32 pm
by chad_g69
i get my cables from 'Scanshop' on ebay (riley96)
got 4 cables from him at about $50 each depending on what cable
NEVER had a problem
he is a fast shipper, and the cables work GREAT
chad
Posted: Mon Jun 24, 2002 12:40 pm
by alex
Monty does a lot of selling of homebrew aftermarket cables, and stands behind his work. I do not know what he charges per cable, but from what I see, he does good work, and a great person to deal with. I suggest emailing him over sending a PM.
-Alex
Quality always comes w/a price
Posted: Mon Jun 24, 2002 12:50 pm
by Code3Response
Throw in another for ScanShop. Just got my MCS2000 cable on Saturday and its awesome and works great!
Posted: Mon Jun 24, 2002 5:30 pm
by kf4lhp
I'm another satisfied customer of ScanShop. Bought a Jedi cable from him, no problems at all with the many MTX, MTS, and HT1000s I've programmed so far!
Built my own Maxtrac cable, but that's different...
--mws
http://www.scanchattanooga.com/
Posted: Tue Jun 25, 2002 9:54 am
by Pj
I took my saber cable, changed pin 6 to 8 (or what is 8 to 6? -- see batlabs) and Bam! Astro Saber cable.
Posted: Tue Jun 25, 2002 11:22 am
by chad_g69
Pj wrote:I took my saber cable, changed pin 6 to 8 (or what is 8 to 6? -- see batlabs) and Bam! Astro Saber cable.
since i have a saber and a astro saber, i took my saber cable and installed a switch, that lets me change from analog saber to astro saber
chad
Posted: Tue Jun 25, 2002 7:46 pm
by CHEFA2001
Rather than altering your factory or aftermarket, saber or a/s cable, pickup a little adapter from radio shack which has the db25 on both sides and make the required jumper changes, this works great as I have used that for a few years before getting teh nerve to purchase a genu-"wine" motorola astro cable.
Cables
Posted: Fri Jul 05, 2002 9:09 am
by scanman
Thanks for the compliments guys!!!!!!!!!!
SHIPPING
Posted: Tue Jul 16, 2002 7:24 pm
by watchbuddy
Yah! He Is Sure A Fast Shipper (Hee! Hee!)
Has it all and the best quality I have seen in a long time!. Keep Up The Great Work Their Phillip!
Posted: Mon Aug 12, 2002 10:32 am
by Monty
HI:
For those interested in a [ multi-Mode ] Astro / Saber
program cable, I have both Factory ones & Clones
My clone Cable is made Perfectly, with all the proper
cable supports @ both ends for Commecial Use. With
a Adaptor I make, you can use the Normal Saber Propgram
Cable, and immediately have a Astro-program Cable.
The Saber Cables I sell above for 85.00, and the Adaptors
for 30.00
If you are a Die Hard, Do Flash Programming, I can offer
you the Facotry originals for 195.00 and I also have the
RTX4005B Series Test Boxes too
The reason the Factory Astro-Saber Cables are so
expensive is they have the Flash options
Monty