Page 1 of 1
Motorola 16 Pin Jumper Plug Part #
Posted: Sat Jan 27, 2007 5:44 pm
by Mikey
Can anybody tell me the part # and price for the 16 pin jumper plug used on the GM300 to jump the Internal Speaker leads.
Thanks in Advance
Mikey
Posted: Sat Jan 27, 2007 6:07 pm
by MetroMan
HLN9242 is the 16 pin accy kit with a connector, 9 wires with a connector on one end, 16 crimping terminals and a removal tool. List is $5.65.
There's a part # for just the connector but I don't have that available. I'll post it Monday if nobody else comes up with it.
Posted: Sat Jan 27, 2007 6:28 pm
by aaknitt
You can also get the connector and sockets from Digikey. Quoting from
http://www.batlabs.com/maxrad.html (the GM300 and Maxrad 16 pin connectors are the same):
# Connector, with locking tab 16 pin, 104422-1-ND (AMP 104422-1)
# Contact, A3007-ND(AMP 1-87309-3)
Andy
Posted: Sat Jan 27, 2007 6:33 pm
by BrienD
If you are trying to activate the internal speaker and all you need is to short the twp pins I think 15-16, I use a computer jumper. I just bought ten for .99 at my local computer parts store.
Brien
Posted: Sat Jan 27, 2007 6:46 pm
by Mikey
I've got the Acc. pin connector kit, but i need the actual jumper plug that Motorola puts on the back of there GM300 as standard.
Posted: Mon Jan 29, 2007 6:12 am
by MetroMan
If you have the connector kit you should be able to make your own jumper. I've never seen a part number for the plug with a jumper btwn 15 & 16.
Checked Digi-Key for the connector and looks like they only sell in 500 Qty. Mouser has them @ $1.52 for one and $1.37 each in ten quantities.
Mouser #571-104422-1