Radius 216 problems!
Posted: Sun Jul 08, 2007 3:56 pm
I'm having problems with a Radius 216. I tried to read the radio with the Maxtrac R6 RSS and couldn't. I then tried to read it with the Maxtrac LAB RSS and was successful. It came up as a Radius M214, which is what I thought it was at first. I changed the freq's that I needed to and copied the codeplug back to the radio. Now it seems to be operating a bit goofy. I will only key up for a second or two and if you hold the ptt button longer the display starts to do some whacky stuff. I thought the M214's and M216's were the same but I guess not ? I'm also guessing I'll need to get a fresh code plug, even though I have the original code plug saved in the Maxtrac lab. If anyone knows whats going on I would appreciate the help. I've programmed a few GM300's and other Maxtrac's but the 2 or 3 Radius's I've done I've always ran into problems. I'm more knowledgable and prefer the JEDI series of radios.
The model number is D43LRA7PA5BK.
TIA
Doug
The model number is D43LRA7PA5BK.
TIA
Doug