Page 1 of 1

XTVA Problem

Posted: Mon Sep 22, 2008 5:16 pm
by caprice96
I have searched around and cant find an answer to my problem so here it goes.

I have a XTVA with a HHCH and when I drop my UHF XTS3000 in i get it to display the channel info on the HHCH but no control (Low Beeps). Here are the specs on the radio :

Host : 07.10.01
DSP : 08.02.06
Flash : Whore (1C5E)
Model # : H09RDH9PW7AN

I have tried one of both VHF XTS3000's, an 800 XTS3000 and a UHF R2 XTS5000 all of which worked as expected. I though maybe it had something to do with the keypad lock so I turned it off totally and still nothing. I compared my general radio config to one of my VHF 3K's and still nothing. I'm fresh out of ideas, so if anyone could give me a clue it would be appreciated. Thanks.

Re: XTVA Problem

Posted: Mon Sep 22, 2008 5:42 pm
by batdude
are any of the other radios (that work right)

have

Whore

in their flash?


if not, i think you answered your own question!



d

Re: XTVA Problem

Posted: Mon Sep 22, 2008 5:47 pm
by caprice96
I guess that would help. The VHF 3K's are also 1C5E's the 800 is legit and the 5K is a whore.

deleted

Posted: Mon Sep 22, 2008 6:12 pm
by Tom in D.C.
deleted

deleted

Posted: Mon Sep 22, 2008 6:15 pm
by Tom in D.C.
deleted

Re: XTVA Problem

Posted: Mon Sep 22, 2008 6:20 pm
by caprice96
Brain Fart, sorry about that Tom,

Yep all setup. I set one button to be th keypad lock b/c I have it on the #3 side button on the radio but when I disabled it from the HHCH and the radio still nothing.

Re: XTVA Problem

Posted: Mon Sep 22, 2008 9:05 pm
by jmr061
The internal codeplug probably isn't set up properly (ie hack job).

Jason