Batboard

Hi all, I'm new to programming, but will RSS 6.5 program my astro saber III ? (I got a question asked from a buyer)

Heres the info on the radio, tell me if it will work or not, thanks.

Model - HO4SDH9PW7AN

Flash Code - 591008-0B0C00-5

The options in this radio is as follows :



Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H101,G101,H169 Conventional Repeater Access (Analog Operation Only)(MDC1200 or Singletone)
H868/W298 Conventional Multikey and Analog Conventional MDC OTAR
G170/H43 Remote Monitor and Radio Trace
H38/G51 Smartzone Operation
Q354 OTACS (Over The Air Channel Steering)
Q353 OTACR ((Over The Air Channel Reassignment)
Q351 MODAT Operation
Q173/G173 Smartzone OmniLink Operation
G182 Enhanced Radio Call Protocol


1 Meg memory

DSP- 07.03.20

R. 07.07.00

RSS 6.5 will only program a radio that has been programmed with 6.5 or OLDER. If the radio has been programmed already with something higher than 6.5 you will get a codeplug error message when reading the radio.

ok, thank you for responding !