Batboard

I'm trying to program my HT600 with a 2 meter simplex channel. I know that I need to program the transmit frequency example 146.520 with the transmit pl disabled. Would you leave the recieve frequency blank or put 146.520 with no pl as the recieve frequency.

For a simplex frequency, you would program the frequency in both the transmit and receive locations. If you left the RX blank with a TX, your radio could talk to others but would not hear anything.

KC2TJS wrote:I'm trying to program my HT600 with a 2 meter simplex channel. I know that I need to program the transmit frequency example 146.520 with the transmit pl disabled. Would you leave the recieve frequency blank or put 146.520 with no pl as the recieve frequency.

Thanks for the help.