Page 1 of 1
Minitor amp charger power connector
Posted: Tue Jan 20, 2009 8:07 pm
by ffexpCP
I’m looking for the power connector on the back of the minitor amplified chargers. I need both male and female ends.
RadioShack doesn’t have it in their parts drawer- I already checked. Anyone have a part number from mouser or similar?
Re: Minitor amp charger power connector
Posted: Wed Feb 04, 2009 6:26 pm
by n3zix
The Minitor 5 Amp charger part number?
Re: Minitor amp charger power connector
Posted: Sat Feb 07, 2009 7:30 pm
by ffexpCP
I'm looking for the 2 pin 12V power connector on the back of the amplified chargers. It is between the antenna and accessory connector.
It looks like the same connector is used on the Minitor 2 and 3 / 4 amplified charger. I don’t know about the Minitor 5 charger as I haven’t seen one yet.
What I want to do:
I want to use the accessory connector to activate a table lamp. I have an external relay for that. But I need a power source for the relay and I was planning on using 12v off the charger’s power plug. I don’t want to cut and splice the cord, so I was hoping I could find a male and female ends and make my own inline splice.
Did I explain it well enough or still am I still clear as mud?