To newly registered users: Welcome! Please read...

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

estimatorjosh
New User
Posts: 1
Joined: Thu Sep 18, 2014 8:18 am

Re: To newly registered users: Welcome! Please read...

Post by estimatorjosh »

Thank you for the welcome
User avatar
FD5722
New User
Posts: 1
Joined: Thu Sep 18, 2014 1:55 pm
What radios do you own?: See my Sig

Re: To newly registered users: Welcome! Please read...

Post by FD5722 »

Just wanted to drop in and introduce myself. My name is Daniel and I live in Salisbury, North Carolina. I was a Firefighter & EMT up until 2011 when I was taken out of work because of a back injury sustained in a car wreck in 2005. On my time off from the FD I worked in radio from 1998 until 2010. I started off as an installer and worked my way up to the position of Systems Engineer. Unfortunately the back injury caught up to me in 2011 & I've had 3 back surgeries since. Once in 2012, 2013, and 2014. While I don't like not being able to work it does open up more time for me to indulge in my radio hobby, especially the days when I'm "grounded" in my recliner from pain. Enough of that, moving on..........

I've been a board member over at Radio Reference since 2006, and been a "stalker" here for just about as long & figured it was time to join over here too, LOL. I look forward to meeting more of the board members here!!

BTW, my screen name here (FD5722) is the same one I go by at RR.
Daniel - FD5722

Radios: "Daily Drivers" - EF Johnson 5100 VHF P25 (M3 w/FPP), Motorola JT1000 (VHF), Motorola MTS2000 800 (Used for conventional 8CALL/NIFOG Interoperability), Kenwood TK390 (UHF), Uniden 396XT (800 P25 monitoring), Uniden 346XT (Conventional trunk system monitoring and testing), and WAY to many more to list here LOL
Mr.X
Posts: 30
Joined: Thu Oct 02, 2014 8:02 am

Re: To newly registered users: Welcome! Please read...

Post by Mr.X »

I'm not sure I can PM an admin. My PM sits in the "OutBox" rather than Sent messages.

If that's not the proper way to contact an admin, then please let me know the proper method.
User avatar
blackwater
Posts: 50
Joined: Fri Dec 03, 2010 12:45 pm
What radios do you own?: XTS-5000, APX 7000 8/U

Re: To newly registered users: Welcome! Please read...

Post by blackwater »

I've been a member since 2010, and I'm looking to make a WTB thread and it won't let, Can someone please move me :)
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

Mr.X wrote:I'm not sure I can PM an admin. My PM sits in the "OutBox" rather than Sent messages.

If that's not the proper way to contact an admin, then please let me know the proper method.
It will remain in the outbox until it is actually read, then it moves to the 'sent' messages.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Mr.X
Posts: 30
Joined: Thu Oct 02, 2014 8:02 am

Re: To newly registered users: Welcome! Please read...

Post by Mr.X »

wavetar wrote:It will remain in the outbox until it is actually read, then it moves to the 'sent' messages.
Gotcha. Thank you for that explanation. I'm used to other BB systems that don't work that way.
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

blackwater wrote:I've been a member since 2010, and I'm looking to make a WTB thread and it won't let, Can someone please move me :)
Done!
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Groupa66
New User
Posts: 4
Joined: Sat Oct 11, 2014 6:41 pm
What radios do you own?: motorola xtl 2500

Re: To newly registered users: Welcome! Please read...

Post by Groupa66 »

Hi all I am new from south Australia and would appreciate a point in the right direction after recently getting hold of a 2 way trunk radio i am very interested in its capability's. I'm new to the forum and new to this scene any help would be greatly appreciated
marc-ynm
New User
Posts: 9
Joined: Thu Mar 21, 2013 6:45 pm

Re: To newly registered users: Welcome! Please read...

Post by marc-ynm »

Hi .. Mark here - over in the UK -
i am a Ham licensed for 30 years, one of the UK's only Astro / P25 users to.. its a lonely job, but someone's got to do it..
I was hoping to be uncaged too - i am hoping to find an old 66-88 mhz Saber (or other bits) which are rare on these shores..
we play with, and or mod Astro Sabers, Sabers, Astro spectras, XTS2500, even ancient old VSELP spectras and a VSELP HT !

Hopefully it'll be ok for me to keep an eye open for much-needed bits, if uncaged :)

Thanks either way..

Mark
User avatar
drspinbag
Posts: 8
Joined: Mon Aug 25, 2014 6:44 pm

Re: To newly registered users: Welcome! Please read...

Post by drspinbag »

I would like to be moved into the registered Users group. It's nice to know I am dealing with knowledgeable people, and would like to contribute as well. I have bought a few higher priced things on here, and it went smoothly, but I had to have a friend give them my number to do it because I am a new user. Moderator PM for details if you like.
User avatar
KC9MDQ
Posts: 44
Joined: Fri Jul 18, 2014 3:50 pm
What radios do you own?: Motorola,Vertex, Kenwood

Re: To newly registered users: Welcome! Please read...

Post by KC9MDQ »

Howdy, all.

I'm just dropping a line to all of the other " Long time lurker, first time poster" types out there besides me. While certainly not one of the most active boards that I frequent, this one is certainly jam packed with useful, friendly, helpful people. I just want to take a moment to acknowledge the unsung heroes of the BatBoard. Thanks for all of the help!


73, de KC9MDQ
Marshfield Area Amateur Radio Society resident Commercial Radio Geek, Hewitt Area Fire Department Firefighter/EMT and Department Radio Technician
Powered by Yoyodyne Propulsion Systems
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by Will »

Welcome to the BatBoard Sir.
spaceydeeh
New User
Posts: 1
Joined: Sun May 10, 2015 3:42 pm

Re: To newly registered users: Welcome! Please read...

Post by spaceydeeh »

Hi everyone,

am new to this forum, though not new to Motorola CPS... Unfortunally I didnt had much time last couple of yours, now I see what I missed all that time...
so, lets programm again...
Alixtrol
New User
Posts: 1
Joined: Tue May 12, 2015 11:28 pm

Re: To newly registered users: Welcome! Please read...

Post by Alixtrol »

Hi,
I have read this anouncement, and now i am a member of this forum, so i wil know more ahout this site...
Thank u...
tztop10
Posts: 34
Joined: Mon Sep 29, 2014 2:08 am
What radios do you own?: HT1250 EX600XLS CDM1250 CP200

Re: To newly registered users: Welcome! Please read...

Post by tztop10 »

how can I be a registered user, been on for almost a year posts take a while still
bstafford
New User
Posts: 14
Joined: Fri Dec 12, 2014 11:49 pm

Re: To newly registered users: Welcome! Please read...

Post by bstafford »

Hey
As a longtime lurker/somewhat recently registered user here I figured it was about time that I post something on here to say hi.
Im definitely not new to the radio world and some of you may know me from P25.ca aka communications.support as I have been a member and relatively active poster over there for a few years. Anyway, i'm looking forward to becoming more active over here in addition to the other sites I am a member of.
aagon
Posts: 148
Joined: Mon May 26, 2014 4:55 pm
What radios do you own?: MOTOROLA APX 7000 AND APX 6000

Re: To newly registered users: Welcome! Please read...

Post by aagon »

I have been a member if this board for over a year and i have been somewhat active. Why am i still a new user?
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

aagon wrote:I have been a member if this board for over a year and i have been somewhat active. Why am i still a new user?
You clearly didn't read through the thread, particularly where I say in the second post of the thread:
wavetar wrote:I've opened this announcement up to allow 'newly registered users' to reply in the thread, specifically for the ones that may not be so 'new' anymore.

As you may or may not know, there is no automatic trigger to move 'newly registered users' over to 'registered users' based on time, or post count, etc. It needs to be done manually. As I read through or approve posts from new users, I have been changing their status based loosely on time served & post count.

Obviously, I don't view everybody's posts on a daily basis. If you feel you've 'done your time' as a newly registered user & are tired of waiting for your posts to be approved before being viewed, let us know in this thread, and chances are, we'll get you moved over!

Todd
So that's why. Unless you ask, or post enough to really stand out, you likely won't get noticed. All that said, welcome aboard.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

tztop10 wrote:how can I be a registered user, been on for almost a year posts take a while still
Done.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
kc9fsh
Posts: 13
Joined: Sun Aug 10, 2008 11:27 pm

Re: To newly registered users: Welcome! Please read...

Post by kc9fsh »

Can I get moved to registered members? Although I haven't posted much I have lurked around a bit since 2008 and my account was registered in 2008.

Thanks,
Tim
KC9FSH
racer38
New User
Posts: 2
Joined: Sat Dec 12, 2015 3:31 pm

Re: To newly registered users: Welcome! Please read...

Post by racer38 »

Well I am new, and decided to register since I have a problem with one of my HT's and a search provided to similar posts. I have been in Ham radio a long time and just got interested in DMR and Mototrbo. Been having some fun with that until I killed my 6550. This seems to be the place to get questions answered and I am sure I will have many more questions as time goes on.. I also have a couple of Mantric Radios pulling duty as a Star repeater. They work Great !

Cheers

Craig, W1MSG
kc9fsh
Posts: 13
Joined: Sun Aug 10, 2008 11:27 pm

Re: To newly registered users: Welcome! Please read...

Post by kc9fsh »

Is there any way to get moved to registered users? I have been waiting for about 9 hours to get a post approved from this morning. Like I said earlier I created my account in 2008 and have lurked but just recently started posting.

Thanks
jamesshearer
New User
Posts: 3
Joined: Mon Apr 11, 2016 8:05 am

Re: To newly registered users: Welcome! Please read...

Post by jamesshearer »

Hello,

I am a newbie here on the board. I maintain the radios out in Death Valley National Park. I have the pleasure of maintaining XTL5000 W4 radios which make up about 95 percent of our vehicle fleet and a small contingent of XTS3000 which I recently received new in the box but are actually 13 years old.

J. Shearer
Eagle Scout
New User
Posts: 3
Joined: Fri Apr 22, 2016 9:22 am

Re: To newly registered users: Welcome! Please read...

Post by Eagle Scout »

Hi just joined! I have a Saber 3 with secure net I hope to learn more about it and be able to program it.
PD0RBO
New User
Posts: 1
Joined: Wed May 18, 2016 12:02 pm

Re: To newly registered users: Welcome! Please read...

Post by PD0RBO »

Hi there!

I'm à registered HAM and tinkering around with electronics since I was eight, I actuallly bought à GM950 (M08KHF6AN3AN) figuring that I could use the case and powermodule for a design of my own.

Decoding the model number tought me the radio is either à 136-174Mhz Vera_abbekerk@hotmail.com
User avatar
k7bpg
Posts: 16
Joined: Wed Oct 07, 2015 11:13 am
What radios do you own?: XTS/XTL5000, APX-6/7/8000

Re: To newly registered users: Welcome! Please read...

Post by k7bpg »

Hello,

I haven't done much posting, but have been a member since last year. Is there a chance I could be let out of the pen? Trying to get some help with a radio system I'm working on.

Thanks
Brian
User avatar
cadpattact
Posts: 14
Joined: Wed Mar 30, 2016 3:30 am
What radios do you own?: XTS5000 XTS2500 XTS3000

Re: To newly registered users: Welcome! Please read...

Post by cadpattact »

Hi everyone,

I'm a radio hobbyist with experience working with emergency services, formerly as a volunteer as well as procurement. I was a member on P25.ca/Communications.Support from 2013 up until the site went offline. I look forward to reading through the existing discussions and learning from professionals in the field of public safety communications. ^SP
W2IBC
Posts: 19
Joined: Fri Jun 14, 2013 4:29 pm
What radios do you own?: Maxtrac,gm300,msf5000

Re: To newly registered users: Welcome! Please read...

Post by W2IBC »

can I get bumped over to registered users? been here awhile, don't post much honestly cause well I don't have much to say. but I am a repeater owner and a moto user. maxtrac, gm300 and now MSF5K
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

W2IBC wrote:can I get bumped over to registered users? been here awhile, don't post much honestly cause well I don't have much to say. but I am a repeater owner and a moto user. maxtrac, gm300 and now MSF5K
Done!
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
LoneWolf
New User
Posts: 4
Joined: Fri Oct 28, 2016 6:44 am

Re: To newly registered users: Welcome! Please read...

Post by LoneWolf »

Good morning,
I hope that is the right topic.
I am new user and I want to say hallo all and greetings.
Many thanks

LoneWolf
fyrfyter33
New User
Posts: 1
Joined: Sun Nov 20, 2016 6:34 am

Re: To newly registered users: Welcome! Please read...

Post by fyrfyter33 »

I am a newb here. My name is Aaron. I live in Cincinnati, OH, where I am a firefighter/paramedic. I am responsible for all of our mobile and portable radios within the fire department. Life was easy when things were normal, with only two types of radios. Now that the XTS series is EOL, I am finding myself needing to learn more about the new APX series, and some "brains to pick" along the way seem helpful.

Thanks!
User avatar
cadpattact
Posts: 14
Joined: Wed Mar 30, 2016 3:30 am
What radios do you own?: XTS5000 XTS2500 XTS3000

Re: To newly registered users: Welcome! Please read...

Post by cadpattact »

Admin, would someone please make me a registered user? Thanks!
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

cadpattact wrote:Admin, would someone please make me a registered user? Thanks!
Done! Sorry for the delay.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
triptolemus
Posts: 24
Joined: Sun Jan 18, 2015 3:09 pm

Re: To newly registered users: Welcome! Please read...

Post by triptolemus »

May I pleased be moved into Registered Users?

Thanks!
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

triptolemus wrote:May I pleased be moved into Registered Users?

Thanks!
Done!
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
W3AXL
Posts: 114
Joined: Fri Sep 04, 2015 9:02 am
What radios do you own?: an unhealthy amount of them

Re: To newly registered users: Welcome! Please read...

Post by W3AXL »

Could I get moved over into registered users as well?

Thanks!

[Done -Alex]
User avatar
W5KVV
Posts: 13
Joined: Sun Jan 22, 2017 8:00 pm
What radios do you own?: Motorola, Midland, Kenwood etc

Re: To newly registered users: Welcome! Please read...

Post by W5KVV »

Hi guys. New member checking in from SE Oklahoma. I've been lurking around BL for some years, but just joined the forums. I'm not much on the facebook groups.

At any rate, I have numerous projects, starting with a MSR 2000 that I'll be seeking guidance on. My long time mentor has moved across the state and I no longer have him at my disposal. You can only do so much over the phone.

Thanks for having me.
-Matt
Matt
W5KVV
Farside
New User
Posts: 4
Joined: Wed Feb 08, 2017 6:23 am
What radios do you own?: kenwood 930s,940 heath HW-101

Re: To newly registered users: Welcome! Please read...

Post by Farside »

Hello Everyone

New user here, appreciate the Welcome message , find this forum fairly easy to navigate and not to much
nonsense as per other forums iv joined in passed, seems there are some great folks on here.
hope to contribute when i can , when iv got an answer ill be sure to help .

Your New user Keith N ( Farside )
berkinet
Posts: 30
Joined: Fri Jan 06, 2017 11:30 am

Re: To newly registered users: Welcome! Please read...

Post by berkinet »

I am still a relatively new member here and, in general, am not too bothered by the moderation. However, I have found that when asking for help, it would nice to be able to respond more quickly to questions, etc. For that reason, I would like to request to be able to post un-moderated.

Thanks for your consideration.

Richard
dustinw251
New User
Posts: 2
Joined: Mon Jun 09, 2014 5:54 pm
What radios do you own?: xts5k, xts25k, tk3180, tk2180

Re: To newly registered users: Welcome! Please read...

Post by dustinw251 »

Hi guys I joined in 2014 and I know I don't post anything mainly because I do a lot of reading and studying when I have an issue with something. Heck I don't even login half the time, lol. But if possible could you unlock me, if not I understand, maybe I need to get a little more active.
CCheesman
New User
Posts: 5
Joined: Wed Mar 08, 2017 7:52 am
What radios do you own?: XTL's XTS's

Re: To newly registered users: Welcome! Please read...

Post by CCheesman »

Hi guys I've been a long time lurker and just finally registered and now realizing that i should have a long time ago. I used spend tons of time on P25.ca but now that it gone I'll been spending the time on here with the tons of info that available here.
well that's as f!@ked up as a homemade radio. :lol:
Microtech
Posts: 11
Joined: Mon Apr 14, 2008 7:45 pm

Re: To newly registered users: Welcome! Please read...

Post by Microtech »

Hi--any chance I can get off probation---registered in 2008--- the site is a wealth of information--
Things have sure changed a lot since I was able to convert a Solid State Dispatcher to 2 meters--with a whole 2 channels!
Thanks
chopskxw
New User
Posts: 4
Joined: Mon Feb 20, 2017 3:00 pm
What radios do you own?: XTL2500, XTL5000, and HAM gear

Re: To newly registered users: Welcome! Please read...

Post by chopskxw »

Hello all! New guy here. Have been an avid fan of Kenwood's commercial gear, but more recently have been getting into Moto gear. I am basically self-taught regarding radios/radio systems, and I have a lot still to learn. I started into radios in public safety, then became a HAM operator. I promise there will be lost of questions about my new Moto gear, but I will try not to annoy anyone and give back when possible.
Tó Paiva
New User
Posts: 5
Joined: Sat Apr 22, 2017 6:41 am

Re: To newly registered users: Welcome! Please read...

Post by Tó Paiva »

Hello, I am Antonio from Portugal and I would like to thank you for accepting my registration at the Batboard Forum. My experience with motorola radios is few, but I am counting on you to help me with my doubts regarding how they work, I am not a buyer, a seller or representative of any brand of equipment I am just a radio communications enthusiast who owns motorola equipment but who is not very familiar with them.

As we say here 73's
User avatar
OCSD117
was RPDM313
Posts: 618
Joined: Mon Mar 21, 2005 8:52 am
What radios do you own?: XTL2500, APX3000, APX7000

Re: To newly registered users: Welcome! Please read...

Post by OCSD117 »

Welcome Antonio!
Carlwood Lipton: [real life interview with Lipton where he recites a quote from William Shakespeare] From this day to the ending of the world we in it shall be remembered. We lucky few, we band of brothers. For he who today sheds his blood with me shall be my brother.
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by Jim202 »

Tó Paiva wrote:Hello, I am Antonio from Portugal and I would like to thank you for accepting my registration at the Batboard Forum. My experience with motorola radios is few, but I am counting on you to help me with my doubts regarding how they work, I am not a buyer, a seller or representative of any brand of equipment I am just a radio communications enthusiast who owns motorola equipment but who is not very familiar with them.

As we say here 73's


Welcome to the board here.

As a suggestion, when your looking for some information or help, provide the radio brand, the radio model and what the problem is or what your looking for. if your using some software that isn't working correctly, please provide what it is and the version. Also what computer operating software your using.

The reason for all the information is there are some interactions of computer operating system software and the Motorola radio software that can cause problems. The more details you can provide, the faster your going to solve your issue.

Some of the older Motorola radios require they be programmed with your computer running in DOS. Not in a DOS window inside a Windows XP or newer.

You will also need a RIB (Radio Interface Box, which is a voltage level converter) for many of the radios to be programmed. There are some of the newer radios that you can get that will run off of a USB connection. But these have a built in voltage level converter. There are even some radio programming cables that will work from a serial port. But these also have a built in voltage level converter.

If your good with a soldering iron, you can make many of the radio cables that go between the radio and the RIB. I do this all the time. The cable information is available in several places on the Internet. I find that starting with the batlabs.com site is a good starting point. There is a wealth of information there. You will spend some time reading there. Another good web site is the repeater builders site.

Have a good time working on your radios.

Jim
User avatar
Wowbagger
Aeroflex
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: To newly registered users: Welcome! Please read...

Post by Wowbagger »

I just met somebody who drove from Winnipeg to Wichita to bring his 2975 in for service (he juuuuuuuusssssst squeaked under the cut-off for RMA support). He has been a lurker here, and asked the service guys if they could call me over to meet him (which I did).

He said he's been trying to register with the board for over a year but not been getting anywhere. Is there some problem with registering new users?
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: To newly registered users: Welcome! Please read...

Post by wavetar »

Not that I'm aware of Wowbagger, and I don't suppose he gave any details? There have been plenty of people join in the past year.

On another note, today I've upgraded several more posters in this thread to registered users.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
User avatar
Wowbagger
Aeroflex
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: To newly registered users: Welcome! Please read...

Post by Wowbagger »

I gave him a business card and asked him to email me with the info, so when he does I'll follow up.
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
7mary3
New User
Posts: 1
Joined: Tue Jan 05, 2010 6:02 pm

Re: To newly registered users: Welcome! Please read...

Post by 7mary3 »

Could you take me out of the new user status please?
I have been enjoying your site for 7 years now.

I started my career at a local MSS shop in GA and I am currently in the telecommunications industry working at a MTSO for a major carrier.

I also volunteer as the EC for my local ARES group.

Thanks in advance!
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”