Page 1 of 1

Posted: Fri Sep 14, 2001 11:55 am
by bjlf
I have a GM300 in my office and would like to be able to hear and talk from the warehouse,( 30') what would be the best and most simple way tom do this. Changing channels would be nice but not required.

Thanks

Posted: Fri Sep 14, 2001 2:16 pm
by Reslock
Install a local remote on the 16 pin I/O

Posted: Fri Sep 14, 2001 2:17 pm
by Reslock
Install a local remote on the 16 pin I/O

Posted: Thu Sep 20, 2001 12:36 pm
by PMan
CPI Communications Inc makes a great remote for that radio that will give you all the features that you get from the front panel of the radio (except signalling features) .

Plus it gives you an intercom feature between parrallel remotes and beteen base radio and remotes. The channel display and indicators on all remotes mirror that of the radio.

If you get hold of the CPI they should be able to tell you who the local supplier is for there product.

PH: (214) 437-5320
Wats (800) 869-9128

They are in Richardson TX

Hope this helps

Posted: Sun Sep 23, 2001 10:09 am
by Reslock
No offence, but we have not had good experience with CPI. USE MOTOROLA. They are the best and most reliable.