Pronto FLX programming question

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
acadiel
New User
Posts: 8
Joined: Sat Jul 31, 2010 6:36 am

Pronto FLX programming question

Post by acadiel »

Just a quick "gee, I wonder why" question...

The Pronto FLX is a non synthesized unit (or at least, I thought). The Motorola programming software lets you go in to set the frequency of the unit as well as the capcode. Why would the software let you change the frequency in software if you have to tune the thing?

Thanks :)
Top
nypd
Posts: 247
Joined: Thu Oct 23, 2003 7:30 am

Re: Pronto FLX programming question

Post by nypd »

all pagers made after the original motorola bravo, require you to program the frequency via software.....

you need to put the baud rate,freq,cap code and then tune the rx board, i use to be a pager tech.......
im always looking for t-band radio's... especially sabers..
Top
Post Reply

Return to “Motorola Digital and Voice Paging”