Page 1 of 1
Scholer-Johnson EPROM's
Posted: Sun Oct 13, 2002 2:31 pm
by w1ksz
I have three 800 MHz Maxtracs with EPROM's made by Scholer-Johnson (CVT-2-800). I cannot read the code plug with any RSS I have. Either all 3 Logic Boards are fried or something else strange is happening.
Anyone got any ideas ? I want to put one or two on 902 (Receive only) for Repeater Receivers.
Thanks, Dick, W1KSZ
Posted: Mon Nov 11, 2002 4:40 pm
by dhohns01
You need the scholer-johnson programmer and software to read this. The motorola rss will not work.
Posted: Mon Nov 11, 2002 5:48 pm
by Max-trac
Blank the board with a moto conventional chip in it. Not sure if it will go up to 900 though. Might be easier to get a 900 Maxtrac.....
S-J EPROM
Posted: Tue Nov 12, 2002 2:24 pm
by w1ksz
dhohns01 wrote:You need the scholer-johnson programmer and software to read this. The motorola rss will not work.
I was afraid of that. Since I don't have the S/W nor know what the "RIB" looks like, I guess I got three "doorstops" !!
Thanks for the reply, Dick, W1KSZ