ifr 1200s firmware update
Posted: Sat May 28, 2011 7:10 am
had one of my 1200s's die with believe or not one of the EPROM chips. ( had two 256MB PROM's but I have both 512 and 256 EPROM's )
Swapped the uP and then isolated down to the firmware ( working set had a single 512MB EPROM vs the two 256MB )
Have an older version I can use ( 3.0..00 I believe ) to recover form but thought while I had to blow a PROM I would check to see if any one had a more updated version.
Really do not care about the tracking gen option since neither of these have the updated duplex generator.
Thanks
Swapped the uP and then isolated down to the firmware ( working set had a single 512MB EPROM vs the two 256MB )
Have an older version I can use ( 3.0..00 I believe ) to recover form but thought while I had to blow a PROM I would check to see if any one had a more updated version.
Really do not care about the tracking gen option since neither of these have the updated duplex generator.
Thanks