Ht1250 wont program
Posted: Thu Aug 11, 2011 7:34 am
I had already programmed this radio a day or two prior, but I need to change the MDC ID and now I cant read/write the radio.
When I attempt to write the radio I get the message, "Unable to get codeplug from the device in order to verify wether we can write to this device or not"
When I attempt to read the radio I get the message, "Couldnt open port. Check wether device/rib are powered on or not, and the device to rib, and the rib to pc connections are ok"
I can program the other radios (same model/firmware version ect) just not this one. I am using a ebay ribless cable, but dont see that being the problem since it works on the other radios. What could it be?
Radio is R05.13.04
Cps is R06.12.02
When I attempt to write the radio I get the message, "Unable to get codeplug from the device in order to verify wether we can write to this device or not"
When I attempt to read the radio I get the message, "Couldnt open port. Check wether device/rib are powered on or not, and the device to rib, and the rib to pc connections are ok"
I can program the other radios (same model/firmware version ect) just not this one. I am using a ebay ribless cable, but dont see that being the problem since it works on the other radios. What could it be?
Radio is R05.13.04
Cps is R06.12.02