Batboard

Can i program the XPR8400 Repeater and XPR6350 Radios so that they work on the same repeater channel, just different color codes so my client will have two repeater channels. The freq is rx 452.5375 tx 457.5375 so can i use Channel 1 on color code 1 and channel 2 on color code 2 and have two channels out of the repeater. I tried it today channel 1 worked but channel 2 did not. Is there something i am doing wrong or can this not be done?

regards


John

So you want two talk paths on the same repeater?

Timeslots is what you're looking for. Program both channels on the radios with those freqs on both channels, both with colour code 1. Use timeslot 1 on channel 1 and timeslot 2 on channel 2.

Thank you that helps alot.

Best regards


John