2011 Charger tail flasher question
Posted: Mon Nov 14, 2011 1:23 pm
I purchased the LSH Lights 11.1005.CHST tail light flasher made by ABLE 1. There are NO instructions besides what is printed on the flasher itself:
PURPLE: TAIL LIGHT INPUT
GREEN: BRAKE INPUT
WHITE: STROBE FLASH PATTERN
WH/BROWN: STROBE FLASH INPUT
BLACK: GROUND
YELLOW: RIGHT OUTPUT TO LED
BLUE: LEFT OUTPUT TO LED
RED: +12V
My question is...for the brake input and tail light input...HOW do I hook it up?? Just tap into the tail light wire with the purple and tap into the brake light with the green? Shouldn't there be an input AND an output? I have everything but those 2 wires hooked up. I have 2 LED's on my rear deck (yellow and blue wires hooked to them). I'm just not sure what to do with the tail and brake lights. Any help would be appreciated. I'm also looking for a wiring diagram for the tail lights. Can't seem to find one anywhere. Thanks!
Mike
PURPLE: TAIL LIGHT INPUT
GREEN: BRAKE INPUT
WHITE: STROBE FLASH PATTERN
WH/BROWN: STROBE FLASH INPUT
BLACK: GROUND
YELLOW: RIGHT OUTPUT TO LED
BLUE: LEFT OUTPUT TO LED
RED: +12V
My question is...for the brake input and tail light input...HOW do I hook it up?? Just tap into the tail light wire with the purple and tap into the brake light with the green? Shouldn't there be an input AND an output? I have everything but those 2 wires hooked up. I have 2 LED's on my rear deck (yellow and blue wires hooked to them). I'm just not sure what to do with the tail and brake lights. Any help would be appreciated. I'm also looking for a wiring diagram for the tail lights. Can't seem to find one anywhere. Thanks!
Mike