arlojanis wrote:Motorola number 6515076H01
F 501
3 amps

thanks

Okay... 98% sure the fuse is blown... (my own stupid fault... not gonna go into embarrassing details)...


Anybody know where to get a replacement?

I'm half tempted to just take it to the local moto shop and see what they would charge to replace it. (I'm not trusting my SMT soldering skills on a ...

Remove front cover, disassemble mainboard from the chassis. It's on the back, near the battery contacts. Location will vary slightly depending on the band but it should be readily visible, small fuse, ohm it out, check if it's blown.



Its a VHF radio...


Thanks for the info... I'll check that ...

AEC wrote:Either the FLEX cable was inserted improperly(not straight), or you have a defective On/Volume control pot.

Last resort at present, would be that you took out the fuse.

Where is the fuse located?

I acquired an HT1250 with a broken display. Worked otherwise, just the display was bad.

I purchased a display off of eBay, came in an OEM box and has OEM markings on it.


I disassembled the radio according to the Basic Service Manual, replaced the screen, and re-assebled the radio.

Now it will ...