Will that model# work for the sp50+ and sp50 (compact and standard models)

Thanks, brandon

Will that model# work for the sp50+ and sp50 (compact and standard models)

Thanks, brandon

Maybe someone out there can help me. I need help converting some VHF Sp50 & Sp50+ 2 channel radios to 10 channel radios.

I have tried to understand the HEX code editor and it has not worked for me. Does someone else know how to get it to work? or fix the hex code so that it will think the 2 channel ...

You could prolly go to Radio Shack and get a new LED and install it yourself if your good at small stuff like that. Be careful installing it.

I currently have a simple Galls wig-wag flasher on my truck. It seems to work fine. The one from Galls has to be mounts in the vehicle somewhere because it is not weather resistant.

Federal Signal also has a decent one I believe. I also think it can be mounted under the hood.

I use a USB to serial adapter for programming and it seems to work. I had to change the default COM Port setting from Com port 10 to either COM Port 1,2,3 or 4. (RSS's usually only see 1-4).

Email me if you have any questions about it.

Brandon
[email protected]

Does it go into the speaker or mic port?

I tried to adjust the TX power settings. I think I did it right and it did not work for me. Any other ideas? I don't like the idea of a bad logic board.

PLEASE HELP ANYONE!!!

I need some help. I was programming my SM120 with a few new channels. It seemed to work fine. When I noticed I forgot a channel. I went back to read the codeplugs so that I could add/change one, and it reads 100% but then pops up with ERROR 58: Radio Codeplug Error. Because of that error, it is not ...