HT1000 Switch/Button Options

[firefighter2000]

Can anyone explain what each of the buttons & the three way switches can be programmed to do on the HT1000?
Thanks
Craig

[Rayjk110]

As far as I know about the HT1000, the Orange Button on top does emergency signalling.

The Blueish/greenish side button lights up the display/keypad on the series of Jedi that actually have that feature. (only the keypad on HT1000)
I think it can also do something with scan, to, although I'm not 100% sure on that.

Not sure about the button below that, but the button above the PTT will let out static if pressed.

Now, as far as the A/B/C switch goes, there are numerous things that can be configured to preform. Such as; Power Settings, P/L (or) DPL tone enable/disable, Repeater/talkaround, Scan Features, and there are quite a few more, just with mixtures of the above features. (I'd have to fire up my RSS to find out all of them) If I remember correctly, the emergency button can do something with scan, but I'm not sure on that. Somebody elese here mentioned that on the bord here I think. It really all depends on what you would like the radio to do, or how it is setup.

Hope that helps, Ray.

[muggsy09]

I have my HT1000 buttons programmed like this:

Toggle Switch:
A-Scan Program
B-Scan Off
C-Scan On

Buttons:
Orange (Top)-Emergency
Blue (side)- Add/Del channel on scan list
Black (side)-Singletone
Black (side)-Monitor

You can change or have those buttons programmed to do just about anything.

[Jim2121]

http://batboard.batlabs.com/viewtopic.p ... 00+buttons

also some more info (ex: see link) if you do a search above: "HT1000 Options" or HT1000 Buttons

[kf4sqb]

Best I remember, there are a couple of pages in the HT1000 manual on this subject. Yes, there are that many possible configurations. If you need, I think I have a manual here somewhere. I can scan the related pages and e-mail them to you. Just let me know, but be patient. I'm always running a few days behind....