Spectra MLM question

DACS_IV · Post by **DACS_IV** » Mon Jan 28, 2002 1:48 am

The subject sums it up, basically. If you replace the MLM board in a UHF Spectra does it require you to retune the radio? This is assuming it's the proper MLM for that model Spectra. Thanks.

Post by **alex** » Mon Jan 28, 2002 6:38 am

You should write down the values in the RSS that you find in the service menu so that if it does effect it, you can go in and quickly reset them. I believe you go under the logic board replacement menu and follow the steps listed there, and record the data.

I believe in this case, you will only need these values if you are replacing the logic board.

-Alex