Spectra HLN6285 interconnect board. DON"T WAIST YOUR $

[metro121]

I am sure most of you are aware of the HLN6285 interconnect board for the Spectra radio. This is the newset board which will allow you to run an A4 head or the newer advanced heads on a Spectra with out the radio going into a hissy fit and keyeing up as soon as you turn on the radio.
If you are discarding your HLN6058's and HLN6066's and buying the HLN6285, YOU WAISTING YOUR $38.00 PLUS SHIPPING!!!!
Take your your 6058's and 6066's and isolate pins 4,5,22,and 29.
To find these pins. look at your interconnect board while it is still in the radio after taking off the control head. They will be the pins at the top of the board, not to be confused with the lower black plug which the control head has sex with.
Starting from the top row of pins at the very left which will be pin 1. As you get to pin 6 you will see that pin 7 is missing and then continues to pin 8 all the way to the far right which will be pin 19.
Pin 20 starts at the bottom left bellow pin 1 and proceeds to the far right which will be pin 38.
You can cut the traces to each pin or just unsolder it and remove it like a bad tooth.(That is what I do)
You now have an HLN6285