Saber Secure By-Pass Module Wire or Module?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Monty
Administrator
Posts: 2613
Joined: Tue Sep 04, 2001 4:00 pm

Post by Monty »

Hi:

Since there appears to be a question as
to " Shielding " vs " Just a Bridge Wire"
used in the Saber Secure Models, here is a
photo of a Factory Original that Elroy was
speaking of.

<img src="http://www2.4dcomm.com/metrotech/saber_bp.jpg">

It really does not make any difference wether
a Bridge or a simple wire in a Plastic Block
is used.

MOnty
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”