Hello-
With my Saber, I have priority scan set to immediatly jump to our chase and tactical channels. When listening to other channels (non-priority) I get the hatching in the audio as the Saber checks the priorities, this is VERY annoying and I was curious...can I modify the settings in the RSS so that it doesn't jump over and check the priorities as often so the hatching isn't quite as frequent?
Julian
Saber 2 priority scan...
Moderator: Queue Moderator
Never experienced the problem you are describing but my Saber RSS manual says too low of a value setting for the "Scan Priority Squelch" may cause falsing.
It says to select the "SCAN PRIORITY SQUELCH" option in the Align Scan Menu and adjust up or down the time parameter. The default value is $08(or
then reprogram to store the new value.
Hope this helps....
Eddie
N4UMJ
It says to select the "SCAN PRIORITY SQUELCH" option in the Align Scan Menu and adjust up or down the time parameter. The default value is $08(or
then reprogram to store the new value.Hope this helps....
Eddie
N4UMJ