MTS2000 controller will a model 1 work a full display front

PCSAR 4x4 652 · Post by **PCSAR 4x4 652** » Thu Mar 21, 2002 10:15 pm

Will the conroller on a MTS2000 top display (6 digit) work a full keypad front display (14 digit) front cover. A friend and I have been trying to get it to work but the display and buttons only light up. there is no display on the LCD and the buttons do not beep when pushed. Are we missing something or ...?

_________________
T. Freeman
PCSAR 4x4 Unit 652
PCSAR TAC Unit 705

<font size=-1>[ This Message was edited by: PCSAR 4x4 652 on 2002-03-23 02:48 ]</font>

2wayguy · Post by **2wayguy** » Fri Mar 22, 2002 6:24 pm

Before you go too much further,,, better check the firmware version and then make sure you read up on toolproofing.. You could be quite upset if you don't read this first.. If you have old enough firmware you can do what you are looking to do...

PCSAR 4x4 652 · Post by **PCSAR 4x4 652** » Fri Mar 22, 2002 11:50 pm

where is the firmware rev number. it is not displayed in the selftest (5 buton salute).