RICK with 4 radios

coisaruim · Post by **coisaruim** » Fri Mar 22, 2002 12:07 pm

I need to make an unidirecional VHF repeater with 2 UHF links.
Any ideas/sugestions ?

CHEFA2001 · Post by **CHEFA2001** » Fri Mar 22, 2002 2:05 pm

HI, I think that what you want to do is possible, but if you be more specific on the reason and what you need to have as the end result, you will give people who reply more to go on.

My 2 cents.

Will · Post by **Will** » Fri Mar 22, 2002 4:32 pm

Been there done that!

I think he mite want a VHF repeater with a UHF link to another point. This could be done with one of my repeater modules with some added circuits in the module for the UHF link.

CHEFA2001 · Post by **CHEFA2001** » Fri Mar 22, 2002 8:12 pm

Will, Would your repeater module be able to "link" two identical freq. repeaters which are about ten miles apart, via 900mhz maxtracs (for example)

I think I am going to send you an email explaining what I want to do and you can tell me if your module can do it, with any extra required parts, etc..

perthcom · Post by **perthcom** » Fri Mar 22, 2002 8:33 pm

Hi..
there is a 4 port repeater/link controller I use alot so we even stock them.
Programmable, very versatile but not cheap.

email me if you are interested.

Bruce

CHEFA2001 · Post by **CHEFA2001** » Fri Mar 22, 2002 9:23 pm

Is this a motorola item? If so, whats the part #.

Thanks

perthcom · Post by **perthcom** » Fri Mar 22, 2002 9:45 pm

No, I've been scratching my head here trying to remember the name... sheesh Of all the things I've lost in my life, I miss my mind the most..lol

coisaruim · Post by **coisaruim** » Sat Mar 23, 2002 2:16 am

Hi,

That's right, I need a VHF repeater to link witk other two repeaters in UHF.
I know it can be done 'cause I've heardon some people using two original RICK (may be some changes in it).
Both ends should have a 3 radios repeater.
Any other information please e mail me.
Tks,
Luis

perthcom · Post by **perthcom** » Sat Mar 23, 2002 7:04 am

hi
I suggest an RLC-4 from Link Communications.
each of the four ports can be set as a repeater or link and cross-connected to any or all other ports.
http://www.link-comm.com/rlc4.html

Cheers
Bruce