MTR2000 for paging

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
kgison
Posts: 5
Joined: Wed Oct 15, 2003 3:23 am

MTR2000 for paging

Post by kgison »

Hi guys
Has anyone used an MTR2000 for analogue and digital transmission.

I want to use one for voice transmission and digital paging transmission is this possible and how effectice is it.

Many thanks
Kieran gibson
Top
Dan562
Posts: 533
Joined: Mon Aug 23, 2004 7:30 pm
What radios do you own?: Kenwood, Yaesu, ICOM, Motorola

MTR2000 as Paging XMTR

Post by Dan562 »

The MTR2000 T5544 can be used for Analog and Digital Paging. the Paging Encoder must be fed into the J5-A17 Aux Tx Input Port with a 200 uFd capacitor and Deviation set for + 3 KHz on the Service Monitor. The PTT closure must be connected between J5-C9 (High) & J5-C15 (GND).

Dan
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”