Maxtrac Ignition power up

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
mikerabbit
Posts: 67
Joined: Mon Oct 07, 2002 7:17 pm

Maxtrac Ignition power up

Post by mikerabbit »

Hello is there a 5 pin accessory harness to turn on a maxtrac with the ignition on phase?
If so what is the model # or does anybody have one for sale?
Mike
Top
Glen W Christen
Posts: 203
Joined: Sun Sep 09, 2001 4:00 pm

5-pin Maxtrac

Post by Glen W Christen »

Pin 5 is ignition control. You also have to cut/remove the little green fuse on the logic board. If you don't have a plug, the p/n is(used to be) 0980134M01. If you don't need any other accessories, just solder to the pin or if you have a pin of the right size, shove it on without the plug body.
Top
Post Reply

Return to “Vehicle Radio Installs”