Somenone know the meaning of the error codes
that software report when an error ocur programing the gp-300 , P110 and P100
Error codes programing GP300 -P100
Moderator: Queue Moderator
-
alvaro gaviria
- Posts: 7
- Joined: Sat Sep 08, 2001 4:00 pm
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Alvaro: Following codes apply to the GP300/GP350 RSS; I don't know if they still
apply to the P110.
1 - Parity error
2 - No response after send
3 - Innerbyte Delay Error
4 - Checksum error
5 - No power
6 - Multiple Collisions
7 - Serial bus error
8 - Negative acknowledge
15 - Model numbers do not match
20 - RSS version doesn't match codeplug
21 - Radio not supported
22 - Blank board; radio not initialized
30 - Serial number mismatch, or model
number mismatch, or Configuration
register mismatch
51-58 - Radio Codeplug Error
This data is from the first column of the
three columns in the book. Columns two and
three give probable causes and possible
solutions, but are too much to list here.
Regards,
Tom, W2NJS
...in D.C.
apply to the P110.
1 - Parity error
2 - No response after send
3 - Innerbyte Delay Error
4 - Checksum error
5 - No power
6 - Multiple Collisions
7 - Serial bus error
8 - Negative acknowledge
15 - Model numbers do not match
20 - RSS version doesn't match codeplug
21 - Radio not supported
22 - Blank board; radio not initialized
30 - Serial number mismatch, or model
number mismatch, or Configuration
register mismatch
51-58 - Radio Codeplug Error
This data is from the first column of the
three columns in the book. Columns two and
three give probable causes and possible
solutions, but are too much to list here.
Regards,
Tom, W2NJS
...in D.C.