Whelen Edge Bar Replacement/Upgrade parts...exist?

[EOppegaard]

Hey guys...alright so this is a stupid question however are there any current upgrades for a strobe edge bar? I have a mini-edge that I would like to see about upgrading, or at least adding something to it. It currently has the 4 strobes in the corners at an angle, then a dual halogen flasher to the rear. Are there any slide in LED replacements for the Strobes? Or anything else I could play with as far as replacing the halogen flasher.

I do realize that some of these things may be more expensive than just buying a few LED heads and putting them on the vehicle somewhere else. I am just looking around for ideas and may try to pick up some things used.

Thanks again!

Eric

[Station House Products]

Well, you can buy the LED inserts for that bar Eric, but, as you had stated, they will be quite expensive if you go with the factory Whelen units. I would reccomend finding some inexpensive LEDs (such as the ones you can purchase by the inch from Sho-Me) and mount them in the bar. FAR less costly, and probably better looking as well.

As for the flashers, not much there other than maybe putting in a multi pattern headlight flasher to give them different paterns other than just a regular alternating pattern, or, LEDs as well. Drop me a PM if you want pricing on the LEDs by the inch.

[Pj]

If its a 9M bar, then you are good for direct replacements. If its a 9000 series bar, I am not sure if the grooves in the bar will support it.

The Corner LED lights aren't cheap, but are nice and you will need a flasher for it.