ok
this is the same loader I use for system sabers
it'san older des kvl model#t3020ax
saber is a model h04rdf9pw7an
flashcode: 10000010000007
kg1: des-xl
problem loading secure code into my astrosaber 2
Moderator: Queue Moderator
-
sglass
- Batboard $upporter
- Posts: 2282
- Joined: Sat May 18, 2002 2:03 pm
- What radios do you own?: sonic screwdriver
problem loading secure code into my astrosaber 2
Last edited by sglass on Sun Jul 27, 2003 8:32 pm, edited 1 time in total.
Re: problem loading secure code into my astrosaber 2
It is my understanding that you will require a different (newer) keyloader to load the Astro. I am pretty sure that the T3011DX will do the trick. My T3011CX was upgraded to DX for just this reason.sglass wrote:ok
this is the same loader I use for system sabers
it'san older des kvl model#t3020ax
saber is a model h04rdf9pw7an
flashcode: 10000010000007
kg1: des-xl
Additionally, according to http://www.batlabs.com/encrypt.html the T3020AX would be a first revision DES keyloader and not a DES/DES-XL Securenet keyloader and it also states "You will need a D version to program some of the newer radios."
--
John
You WILL need a 3xxxDX loader or better for the Astro line. It will still load a key for the older radios. I believe your KVL was upgraded from a BX to a DX when we got our XTS. It will load the older secure chips (analog sabers/spectras) and the newer UCM modules that we have in our new Astro Spectra. Also, be sure you enable the secure option in RSS (everyone forgets), or it will never load a key.
Lowband radio. The original and non-complicated wide area interoperable communications system
