Maxtrac to do Rebroadcast on PA300 (How?)

Adam · Post by **Adam** » Mon Sep 19, 2005 7:57 pm

Got a Maxtrac and want to hook it up for radio rebroadcast on the PA300, how do I do it? Do I need something extra, like that 5 pin harness?

AVFD2922 · Post by **AVFD2922** » Tue Sep 20, 2005 3:21 am

Use the following, connect the external speakers, pins 1 and 4 of the maxtrac to pins 9 and 12 of the pa300, adjust volume of maxtrac to a comfortable level and switch pa300 to radio rebroadcast. If the volume is too high or low you will have to adjust R11 from the underside of the pa300. That's it and it is under the assumption you have a 5 pin as you stated.

Adam · Post by **Adam** » Tue Sep 20, 2005 5:09 pm

Don't have that wiring harness for the maxtrac. I figured I'd need it though.

Thanks for the instructions!