Minitor V programming base part number

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
Andy2712
Posts: 113
Joined: Wed Jun 22, 2005 9:21 am
What radios do you own?: XTS2500 m3 VHF

Minitor V programming base part number

Post by Andy2712 »

Does anyone have the part number for the programming base for the Minitor V?
Top
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Post by Al »

RLN5709A - Minitor V programming nest.
Top
User avatar
bcooper
Posts: 78
Joined: Sat Jan 26, 2002 4:00 pm

What Power Supply?

Post by bcooper »

What size power supply is needed to power this to flash? Is it a standard 12V DC tip-positive supply?
Top
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Post by Al »

The two that I have were supplied with the UPI....they're 10.5VDC at 6.5W. I checked them on an electronic load, and they do indeed deliver 10.5VDC at 620 ma. I expect that anything rated close to 10-11VDC@600 ma. would work fine as long as it has a filter capacitor hung across the rectifier output(these do, but don't know the value as it's inside the wallwart case).
Top
User avatar
Pj
Moderator
Posts: 5147
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Post by Pj »

Is there a kit number for everything (nest, power supply etc)?
Lowband radio. The original and non-complicated wide area interoperable communications system
Image
Top
Post Reply

Return to “Motorola Digital and Voice Paging”