JT1000

dfc2 · Post by **dfc2** » Tue Jan 10, 2006 12:01 pm

I tried the GOV hack on a JT1000, But before I can even get there, I read the radio and then try and re program the radio with the same codeplug that was read it givems me errors about the wrong Model number ( it is what's listed and it is what rss gives me as options. I then get errors saying the codeplug and the radio are different software versions? any ideas?

DFC2

HLA · Post by **HLA** » Tue Jan 10, 2006 3:47 pm

try another computer or try re installing the rss

kf4sqb · Post by **kf4sqb** » Tue Jan 10, 2006 5:03 pm

Also, what revision of RSS are you using, and on what computer?

Wile E. Coyote · Post by **Wile E. Coyote** » Wed Jan 11, 2006 9:40 am

Verify on the RSS splash screen that it is capable of programming a JT1000 radio. Older versions of HT1000/VISAR RSS can not & will not program a JT. (found that out the hard way)

Good luck on your quest.

~WEC

dfc2 · Post by **dfc2** » Wed Jan 11, 2006 10:53 am

Is there a version that you know will program the JT1000?

I don't have a program key, so I was planning on trying the GOV hack.

DFC2

kf4sqb · Post by **kf4sqb** » Wed Jan 11, 2006 8:59 pm

Version R03.03.00, model # RVN 4098H, I know will program it, and is new enough it will work on a Pentium-class computer. Just happens to be the version I have

.

JustinMoon205 · Post by **JustinMoon205** » Mon Jan 16, 2006 5:59 pm

If you have access to a GOVT model JT and a JEDI clone cable simply clone the GOVT model to the FCC model and you'll turn the FCC model into a GOVT model and will not have to have the key. That is the most simple way I've seen to do it.

-Justin

JT1000

JT1000

JT1000

GOVT JT1000