Does anyone know how to program a CP200 out of band? I have a 146-174 MHz model and I need to add some 143MHz channels. I assume there is somewhere in the CPS that checks for valid frequency range but I don't know where this is stored.
I know the professional trunking series (MTX8250) CPS can be modified to do out of band but it doesn't look like the CP200 has the same format for the band limits. Any ideas?
John
CP200 out of band
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
the frequency range is set in the firmware in the newer radios, it's not set by the software so you can't hack the limits anymore.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS